RE/MAX 440
Dale Joy
dalejoy1@verizon.net
Dale Joy
4092 Skippack Pike, P.O. Box 880
Skippack  PA 19474
PH: 610-584-1160
O: 610-584-1160
C: 215-460-5153
F: 267-354-6852 
Welcome Home from RE/MAX 440!
< Back to My Blog

How-To: Take the Shiver out of a Drafty House

October 19, 2016 2:30 am


(BPT)—A drafty house is not just cold—it’s downright expensive. The kicker? The sources of those drafts can be eliminated inexpensively.

Take the attic, for instance. There was a large hole cut into the ceiling to make way for stairs to it. All of that insulation is now gone, replaced with a thin, unsealed sheet of plywood.

Attics are vented directly outdoors, so they get cold in winter—really cold. What separates your heated home from your cold, un-heated attic? A thin, unsealed sheet of plywood!

Need more proof? Turn the light on in your attic tonight, keeping the stairway closed. See that light streaming through? It’s shining on the gap that is costing you buckets in utilities each winter. Imagine that!

Whole-house fans (which are also installed by way of large hole) can be just as problematic. In this case, a flimsy ceiling shutter is all that stands between you and the elements. Nice.

Fireplaces, ironically, are also drafty—an open damper, even in a well-insulated home, can raise energy consumption by up to 30 percent!

A shut damper isn’t airtight, either. The chimney is an opening to the outdoors—think of it as a window, swallowing up (and out!) all of that costly heated air.

Let’s not forget dryer vents, or exhaust ducts, which can be a source of drafts, too. Most dryer vents employ a sheet metal flapper to reduce drafts—primitive protection, by today’s technology.

The good news is, all of these problems have economical solutions.

• Insulated Attic Stair Cover
• Whole-House Fan Shutter Seal (with Flexible, Textured Insulation, plus Velcro)
• Fireplace Plug
• Dryer Vent Seal (Floating Shuttle)

Winter’s still a few weeks away—get these fixes in now to warm up with all those savings!

Source: Battic Door
 

Published with permission from RISMedia.

Add a comment

TwitterFacebookLinkedin